$410.50
This tilt bar is a structural linkage in the tilt system of Crown lift trucks, tying the tilt cylinder to the mast assembly. As the hydraulic tilt cylinder extends and retracts, the bar transfers that motion into the forward and backward tilt of the mast, keeping the load stable during travel and controlled during pickup and placement. It is built rigid and high-strength to resist bending and wear.
Tying the tilt cylinder to the mast, this Crown tilt bar is the structural link that turns the cylinder's stroke into the forward and backward tilt of the mast assembly on Crown lift trucks. As the hydraulic cylinder extends and retracts, the bar transfers that motion to the mast, keeping a raised load stable in travel and controlled during pickup and placement.
Because it carries the working load of the tilt circuit through every cycle, it is built as a rigid, high-strength member that resists bending and elongation at its pivot points over long duty cycles. A bar that is bent, cracked, or worn at its pins lets the mast tilt drift out of true.
Installed in place of the original, it restores solid, repeatable tilt geometry. Match the bar length and the pin or bushing bores at each end to the part being replaced, since those set how it connects the cylinder to the mast.
| SKU | CR142366 |
|---|---|
| Product ID | 11494 |
| Category | Hydraulics |
| Brand | Crown |
| Weight | 1 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Tilt Bar |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 10.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR142366 |
|---|---|
| Product ID | 11494 |
| Short Link | https://forkliftsetc.net/?p=11494 |
| Part Number |
|---|
| CR142366 |
