$1,141.73
A Raymond hydraulic tilt cylinder pitches the mast forward for load entry and back to cradle a load in transit, turning pump pressure into the controlled angle change an operator makes dozens of times a shift on an electric lift truck. It works under repeated pressure cycling, with the rod seal as the usual wear point once it begins to weep oil past the gland.
Mast tilt on a Raymond electric lift truck runs off hydraulic cylinders like this one, which extends and retracts to pitch the forks forward for entry and back to cradle a load in transit. Built as a Raymond hydraulic component, it links the tilt control and the mast, converting pump pressure into the controlled angle change an operator makes dozens of times a shift.
The cylinder works under repeated pressure cycling, and the usual wear point is the rod seal, which begins to weep oil past the gland as it ages and lets the tilt drift under load. A cylinder that no longer holds position, or leaves oil on the mast, has reached the end of its service life.
When matching a replacement, check the rod diameter, stroke length, and the port and pin mounting against the unit coming off, since tilt cylinders across a lineup share an appearance while differing in exactly these dimensions.
| SKU | RA103006 |
|---|---|
| Product ID | 13867 |
| Category | Hydraulics, Tilt Cylinders |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Tilt Cylinder |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA103006 |
|---|---|
| Product ID | 13867 |
| Short Link | https://forkliftsetc.net/?p=13867 |
| Part Number |
|---|
| RA103006 |
