$134.00
Seal kit for rebuilding the hydraulic cylinder on Raymond lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.
A directional valve for Raymond hydraulic lift trucks, the control element that routes hydraulic oil to the correct port to drive a function such as lift, lower, or tilt, cataloged under Raymond's own part reference. By sending pressurized oil to one side of a cylinder or the other, it controls the direction and timing of a hydraulic actuator.
Carried under Raymond's reference, it replaces the original valve in its mounting position. A directional valve that sticks, leaks internally, or fails to shift shows up as a hydraulic function that responds slowly, drifts, or will not actuate. Fitting the correct Raymond replacement restores clean control of the affected function.
| SKU | RA1152887/01 |
|---|---|
| Product ID | 11962 |
| Category | Hydraulics, Other, Seals, Tilt Cylinder Seal Kits, Tilt Cylinders |
| Brand | Raymond |
| Weight | 0.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Seal Kit |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1152887/01 |
|---|---|
| Product ID | 11962 |
| Short Link | https://forkliftsetc.net/?p=11962 |
| Part Number |
|---|
| RA1152887/01 |
