$38.09
Seal kit for rebuilding the hydraulic cylinder on Crown lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.
This seal kit gathers the individual seals needed to service a hydraulic cylinder on Crown lift trucks. When rod seals, wiper seals, and O-rings harden or wear, the cylinder begins to weep fluid and lose holding pressure. Replacing the full set at once restores a clean, pressure-tight seal so the cylinder extends and retracts smoothly. Each seal is shaped to the correct bore and rod dimensions, giving a consistent fit across the assembly. Installing a complete kit during a rebuild is more reliable than swapping a single seal, since all wear surfaces are refreshed together. Verify the kit against the cylinder and truck model before installation.
| Type | Seal kit |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR-161 |
| Weight (lbs) | 0.20 |
| Length (in) | 1.90 |
| Width (in) | 1.00 |
| Height (in) | 2.7 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR-161 |
|---|---|
| Product ID | 11696 |
| Short Link | https://forkliftsetc.net/?p=11696 |
| OEM Number | CR-161 |
| Part Number |
|---|
| 005913668281 |
| 005916053481 |
| 220016940 |
| 3037847 |
| 800075090 |
| CL7001571 |
| ET19339 |
| ET19340 |
| HY3037847 |
| INCR-161 |
| SY800928 |
| TY00591-36682-81 |
| TY00591-36683-81 |
| TY00591-60534-81 |
| YT220016940 |
