$22.22
Seal kit for rebuilding the hydraulic cylinder on Crown lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.
A leaking cylinder rarely traces back to a single bad seal, so this kit refreshes the whole sealing set for a hydraulic cylinder on Crown lift trucks. It includes the rod seals, wipers, and static seals that guard against internal bypass and external weeping. Over service life these parts lose their elasticity and let fluid escape, which weakens lift and tilt performance. Replacing them together during a rebuild brings the cylinder back to dependable, pressure-tight operation and reduces repeat teardowns. The seals are formed to the cylinder's bore and rod sizes for a proper seat. Check the kit against your cylinder and truck model first.
| Type | Seal kit |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR-222 |
| Weight (lbs) | 0.10 |
| Length (in) | 1.88 |
| Width (in) | 1.00 |
| Height (in) | 1.9 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR-222 |
|---|---|
| Product ID | 11743 |
| Short Link | https://forkliftsetc.net/?p=11743 |
| OEM Number | CR-222 |
| Part Number |
|---|
| 005917374881 |
| 220018339 |
| 3120433 |
| 800014850 |
| CR-222 |
| ET13519 |
| HY3120433 |
| LP894-2121 |
| TY00591-73748-81 |
| YT220018339 |
