$55.50
Seal kit for rebuilding the hydraulic cylinder on Crown lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.
This kit provides the full complement of seals required to rebuild a hydraulic cylinder on Crown lift trucks. Rather than chasing one worn ring at a time, it delivers the rod seal, wiper, and O-rings as a coordinated set so every sealing surface is renewed in a single service. Worn seals allow hydraulic oil to pass the piston or escape at the rod, causing cylinder drift and messy leaks. A fresh set restores a tight seal and steady, controlled motion. Each piece matches the dimensions of the cylinder it serves, keeping installation straightforward. Verify fitment against the cylinder and truck model before installing.
| Type | Seal kit |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR101338 |
| Weight (lbs) | 0.20 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR-230 |
|---|---|
| Product ID | 11805 |
| Short Link | https://forkliftsetc.net/?p=11805 |
| OEM Number | CR101338 |
| Part Number |
|---|
| 005916053081 |
| 800075082 |
| CR-230 |
| CR101338 |
| CRCR101338 |
| ET19352 |
| LP894-2126 |
| TY00591-60530-81 |
| TY00591-60535-81 |
