$28.50
Seal kit for rebuilding the hydraulic cylinder on Crown lift trucks, supplying the rod seal, piston seal, wiper, and o-rings to reseal one cylinder. As seals harden and wear, the cylinder weeps oil, drifts under load, or loses lift; resealing restores full pressure and is the economical alternative to a new cylinder.
Hydraulic cylinders depend on a matched set of seals to hold pressure and keep fluid where it belongs. This kit supplies those seals for a cylinder used on Crown lift trucks, bundling the wear items that fail over time into one package. Aging seals let oil bypass the piston and seep past the rod, which shows up as drift, slow lift, or visible leakage. Fitting fresh seals throughout the assembly returns firm, leak-free operation. Because the components are sized for the cylinder they serve, the rebuild goes back together cleanly. Confirm compatibility with the specific cylinder and model before you begin.
| Type | Seal kit |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR111573 |
| Weight (lbs) | 0.10 |
| Length (in) | 1.00 |
| Width (in) | 1.50 |
| Height (in) | 3.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR-184 |
|---|---|
| Product ID | 12339 |
| Short Link | https://forkliftsetc.net/?p=12339 |
| OEM Number | CR111573 |
| Part Number |
|---|
| CR-184 |
| CR111573 |
| ET13506 |
| GPCRN-111573 |
| LP877-1036 |
| TY00591-44104-81 |
