$6.95
Riding against the shaft on a flexible sealing lip, this oil seal holds lubricant inside a housing while keeping dirt, water, and grit out where a rotating shaft passes through. It serves the driveline and hydraulic components of material handling equipment, staying in contact as the shaft turns so oil cannot weep past a worn lip.
Oil seals sit where a rotating shaft passes through a housing, holding lubricant on the inside and keeping dirt, water, and grit on the outside. This one fills that role in the driveline and hydraulic components of material handling equipment, riding against the shaft on a flexible sealing lip that stays in contact as the shaft turns.
When the lip hardens, cracks, or wears a groove, oil weeps past it and contamination works its way in, which is the point at which the seal has reached the end of its service life and should be replaced. Because oil seals are sized to a specific shaft diameter, bore, and width, match those three measurements against the seal coming out so the replacement seats fully and rides true on the shaft.
| Type | Seal, Oil |
|---|---|
| Weight (lbs) | 0.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | SE-300 |
|---|---|
| Product ID | 12462 |
| Short Link | https://forkliftsetc.net/?p=12462 |
| Part Number |
|---|
| 005910509181 |
| 005913207981 |
| 005916073381 |
| 800076795 |
| CL7003829 |
| CR-093613 |
| CR093613 |
| CR93613 |
| CRCR93613 |
| ET331074 |
| HM93613 |
| HY800076795 |
| SE-300 |
| SY78524 |
| TY00591-05091-81 |
| TY00591-32079-81 |
| TY00591-60733-81 |
| YT800076795 |
