$2,235.00
This support weldment serves as a structural base within the reach mechanism on Crown reach trucks, giving the extending reach assembly a rigid mounting point as it moves the fork carriage in and out over the load. Built as a fabricated weldment, it keeps the load path stiff through repeated reach cycles and holds the carriage square as it extends and retracts.
Crown fabricates this support as a welded structural member of the reach mechanism, giving the extending reach assembly a rigid mounting base as it drives the fork carriage in and out over a load on a reach truck. As a weldment, it keeps the load path stiff through repeated reach and retract cycles so the carriage extends squarely rather than racking.
Because it carries reaching loads at its mounting and pivot points, a weldment that is bent, cracked, or elongated at its holes lets the carriage extend and retract out of square, which shows up as uneven fork travel and accelerated wear in the reach linkage. A sound support restores the rigid, correctly located base the mechanism depends on.
Match the weldment by its overall geometry, mounting hole pattern, and pivot or slide points to the support coming off, since these interfaces set how and where it carries the reach load.
| Type | Support Reach Wldt |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 240.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR152429R |
|---|---|
| Product ID | 15071 |
| Short Link | https://forkliftsetc.net/?p=15071 |
| Part Number |
|---|
| CR152429R |
