$51.55
Cut in Thombert's Dyalon A polyurethane, this load wheel runs 5 inches in outside diameter and 3.88 inches wide on a 2.44 inch bore. Dyalon A resists the cutting, chunking, and tread breakdown that wear out rubber wheels and rolls with low resistance. It is supplied as a wheel only, with the hub sized around the 8605 bearing, and fits Linde, Baker, and Yale lift trucks.
Cut in Thombert's Dyalon A polyurethane, this load wheel runs 5 inches in outside diameter and 3.88 inches wide, riding on a 2.44 inch bore that fixes it to the axle. Dyalon A is Thombert's high-load polyurethane compound, formulated to resist the cutting, chunking, and tread breakdown that wear out rubber load wheels, and to roll with low resistance so an electric truck draws less to move a load.
Thombert documents the wheel as fitting Linde and Baker as well as Yale lift trucks, covering load-wheel positions across those fleets from one part. It is supplied as a wheel only, without bearings pressed into the hub, so the buyer fits new bearings or transfers serviceable ones from the wheel being replaced. The hub is sized around the 8605 bearing.
The bore is the fit-critical dimension on any press-on load wheel, since the wheel presses onto the axle rather than bolting to it. Match the 2.44 inch bore to the axle diameter on the truck, because a press-fit wheel will not seat on a shaft turned for a different size. Sold individually as a direct replacement for a worn load wheel.
| SKU | 1683AO |
|---|---|
| Product ID | 15572 |
| Category | Load Wheels, Tires & Wheels |
| Brand | Yale |
| Weight | 5.25 lbs |
| Dimensions | 5" L × 3.88" W × 5" H |
| Part Type | Load Wheel |
|---|---|
| Manufacturer | Thombert |
| Compound | Dyalon A polyurethane |
| Outside Diameter | 5 in |
| Width | 3.88 in |
| Bore | 2.44 in |
| Bore Depth | 0.827 in |
| Configuration | Wheel only, no bearings |
| Bearing | 8605 |
| Sold As | Each |
| Length (in) | 5.00 |
| Width (in) | 3.88 |
| Height (in) | 5.0 |
