$17.20
This wear pad seats between the sliding metal surfaces of a Crown lift truck's mast rails or carriage, cutting metal-to-metal friction and absorbing load as the carriage travels up and down. As the sacrificial part, it wears down gradually instead of the rail or roller, and a thinning pad opens clearance that shows up as side play, uneven travel, or added noise through lift and lower cycles.
This wear pad is built for Crown lift trucks, measuring 0.4 by 0.6 by 7.5 inches, a slim, elongated profile consistent with a mast or carriage slide pad. Wear pads like this one sit between two metal surfaces that slide against each other, most often on the mast rails or carriage, to reduce metal-to-metal friction and absorb the load as the carriage travels up and down the mast.
Because the pad is the sacrificial component in that sliding contact, it wears down gradually with normal mast cycling rather than letting the mast rail or carriage roller itself wear. As a wear pad thins, clearance in the mast assembly increases, which can show up as side play, uneven carriage travel, or increased noise during lift and lower cycles.
At 7.5 inches long, this pad is sized for a specific mast or carriage location on Crown equipment, making it a routine replacement part for shops maintaining smooth, tight mast operation.
| Type | Wear Pad |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.15 |
| Length (in) | 0.40 |
| Width (in) | 0.60 |
| Height (in) | 7.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | JL3340975 |
|---|---|
| Product ID | 10972 |
| Short Link | https://forkliftsetc.net/?p=10972 |
| Part Number |
|---|
| GD3340975 |
| HJ3340975JL |
| JL3340975 |
