$65.95
Hydraulic hose for Crown lift trucks, carrying pressurized flow in the lift or steering circuit; length and fittings are specific to the routing. Hoses are replaced when they weep, bulge, or chafe, since a failed line drops the load and loses pressure.
A -4 size hydraulic hose assembly with O-ring face seal ends, this line carries pressurized fluid between components in a hydraulic circuit and seals through a flat face rather than tapered threads. The O-ring face seal design compresses an O-ring against a flat mating surface as the nut is tightened, which holds a leak-tight joint under high pressure and resists the loosening that vibration causes on other fitting styles.
The -4 designation sets the connection size, and at about a third of a pound this is a compact assembly built for a short run between fittings. A hydraulic hose is replaced when the cover is cracked, chafed, or bulging, or when a fitting weeps, since a hose that has begun to fail under working pressure can rupture with little warning.
Match the O-ring face seal end size and the assembly length to the line being replaced, since both the seal size and the routing distance have to match for the hose to seat and reach.
| SKU | CR64364-007 |
|---|---|
| Product ID | 10979 |
| Category | Hoses, Hydraulics |
| Brand | Crown |
| Weight | 0.35 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Hose Assembly -4 Orfs |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.35 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR64364-007 |
|---|---|
| Product ID | 10979 |
| Short Link | https://forkliftsetc.net/?p=10979 |
| Part Number |
|---|
| CR064364-007 |
| CR64364-007 |
| TSA-CR064364-007 |
| TSA-CR64364-007 |
