$264.83
This chain anchor secures chain within the truck's lift or mast system on Raymond lift trucks, holding the chain end fixed so the lift system carries load through it. Categorized as chassis hardware and weighing a quarter pound, it installs in place of the original anchor on applicable Raymond equipment.
Anchoring the lift chain to a fixed point in the mast or carriage, this Raymond chain anchor is the end fitting that ties the chain into the truck's lift system and holds the tension the chain carries as the forks raise and lower. It takes the full pull of the load through the chain, so it is a load-bearing termination rather than a simple bracket, and it is made to seat the chain's end link and pin at the anchor point. A compact fitting at about a quarter pound, it does a safety-critical job for its size.
A worn, elongated, or cracked anchor lets the chain shift or loses the secure termination the lift system depends on, which is a failure that cannot be left in service on a mast. Chain anchors are inspected and replaced along with lift chain during mast service, since a chain that has stretched into its wear limit has usually put matching load history through its anchors.
Match the anchor to the chain pitch and the mounting at the anchor point, since anchors that look alike differ by the chain size they terminate and the mast geometry they bolt into.
| Type | Anchor, Chain |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA223-001-569/H35 |
|---|---|
| Product ID | 11022 |
| Short Link | https://forkliftsetc.net/?p=11022 |
| Part Number |
|---|
| RA223-001-569/H35 |
