$23.13
Cataloged to Raymond electric lift trucks, this bracket holds a component in fixed position against the vibration and shock a truck absorbs across a full shift, bolted to the frame or a subassembly so the part it carries does not work loose under load. At roughly a quarter pound it is a light bracket sized for a smaller component. A cracked, bent, or elongated bracket lets the mounted part move.
Cataloged to Raymond electric lift trucks, this bracket holds a component in fixed position against the vibration and shock a truck absorbs across a full shift. A bracket's whole job is to keep what it carries located and supported, bolted to the frame or a subassembly so the part it holds does not shift, sag, or work loose under load.
At roughly a quarter pound, it is a light bracket sized to support a smaller component rather than carry structural load. A bracket that is cracked, bent, or elongated at its holes lets the mounted part move, which accelerates wear on whatever it connects to. When fitting a replacement, match the hole pattern and the mounting face to the bracket coming off, since the bolt spacing and the seating surface are what put the supported component back in its correct position.
| Type | Bracket |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.25 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1033222 |
|---|---|
| Product ID | 11034 |
| Short Link | https://forkliftsetc.net/?p=11034 |
| Part Number |
|---|
| RA1033222 |
| SY99-01351 |
