Bussmann Fuse 250A 125VAC/80VDC for Crown – ANN-250

This Bussmann fuse is rated 250 amps at 125VAC/80VDC and uses a very fast acting limiter design in a bolt-down flat body roughly 3-3/16 inches long, fitted on Crown lift trucks.

A very fast acting limiter fuse is built to interrupt current quickly under a fault condition, protecting the battery, controller, and wiring in a forklift's electrical system from damage during a short circuit or severe overload. The bolt-down flat body design mounts directly into the circuit's fuse holder rather than a cartridge-style clip, which is common on higher-amperage forklift power circuits. Because a fuse is a sacrificial component, it blows and opens the circuit precisely when it is designed to, and once it has interrupted a fault it cannot be reset; it must be replaced with a fuse of the same amperage and voltage rating to maintain correct circuit protection. This 250 amp rating matches the original fuse used in this position on Crown equipment.