$975.00
Angling the mast and carriage forward and back, this Raymond tilt cylinder assembly arrives as a complete, sealed unit that houses the piston, rod, and seals in a finished cylinder, so the fix is a bolt-in swap rather than a rebuild of a leaking or scored barrel. It renews a cylinder that drifts, leaks at the rod, or will not hold the mast angle under load.
Tilt cylinders angle the mast and carriage forward and back, and this Raymond cylinder assembly arrives as a complete, sealed unit ready to install in place of one that has failed. Built for Raymond lift trucks, it houses the piston, rod, and seals in a finished cylinder, so the fix is a bolt-in swap rather than a rebuild of a leaking or scored barrel.
A tilt cylinder that drifts, leaks at the rod, or will not hold the mast angle under load has worn its seals or scored its bore, and a complete assembly renews the whole cylinder at once. Confirm the assembly matches the cylinder your mast uses by mounting and stroke, since cylinders are built to specific truck and mast configurations.
| SKU | RA1152889 |
|---|---|
| Product ID | 11235 |
| Category | Hydraulics, Tilt Cylinders |
| Brand | Raymond |
| Weight | 14 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Cylinder Assy |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 140.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1152889 |
|---|---|
| Product ID | 11235 |
| Short Link | https://forkliftsetc.net/?p=11235 |
| Part Number |
|---|
| RA1152889 |
