$254.72
When the primary lift cylinder on a Crown FC or C5 series lift truck starts to weep or drift under load, this Crown seal kit rebuilds it, supplying the rod seals, piston seals, wipers, and o-rings sized to that cylinder in one set. The seals are the correct diameters and cross-sections for that bore and rod, so a rebuild restores a full pressure seal rather than replacing the whole unit.
When the primary lift cylinder on a Crown FC or C5 series lift truck starts to weep or drift under load, this Crown seal kit is what rebuilds it, supplying the rod seals, piston seals, wipers, and o-rings sized to that cylinder in one set. Seals are the wear point in any hydraulic cylinder; as they harden and lose their edge, pressure escapes past them and the cylinder no longer holds a load the way it did.
Because the kit is matched to the FC and C5 primary cylinder, the seals are the correct diameters and cross-sections for that bore and rod, which is what lets a rebuild restore a full pressure seal instead of leaving a mismatched seal to fail early. Rebuilding with a kit is the standard fix, returning the existing cylinder to service rather than replacing the whole unit.
Confirm the kit matches the primary lift cylinder specifically, since a truck carries more than one cylinder and their seals differ.
| SKU | CR149456 |
|---|---|
| Product ID | 11343 |
| Category | Hydraulics, Lift Cylinder Seal Kits, Lift Cylinders |
| Brand | Crown |
| Weight | 0.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Fc / C5 Primary Cyl Seal Kit |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR149456 |
|---|---|
| Product ID | 11343 |
| Short Link | https://forkliftsetc.net/?p=11343 |
| Part Number |
|---|
| CR149456 |
