$45.96
Carrying pressurized fluid between the pump, valve, and cylinders of a Raymond lift truck, this hydraulic hose assembly feeds the circuit that raises, lowers, and tilts the load. It arrives as a finished assembly with hose and end fittings made up to length, so it installs as a direct replacement built to the routing of the original line.
Routed through the hydraulic circuit of a Raymond lift truck, this hose assembly carries pressurized fluid between the pump, valve, and cylinders that raise, lower, and tilt the load. It comes as a finished assembly with the hose and its end fittings already made up to length, so it installs as a direct replacement rather than a hose that has to be cut and crimped.
Hydraulic hose is a wear part by nature. The cover checks and cracks with age and heat, the reinforcement fatigues under pressure cycling, and the crimped ends are where seeps and blowouts start. A hose weeping at a fitting or ballooning under pressure is due for replacement before it fails outright and drops a load or loses lift.
As a genuine Raymond assembly, it is built to the length, routing, and fitting configuration of the original line, so it matches the port connections and the run it replaces on the truck.
| Type | Hose Assy, Hyd |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.75 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA828-004-280/008 |
|---|---|
| Product ID | 11516 |
| Short Link | https://forkliftsetc.net/?p=11516 |
| Part Number |
|---|
| RA828-004-280-008 |
| RA828-004-280/008 |
