$5.99
Raymond builds this threaded nut into the chassis hardware of their lift trucks, where it clamps a bolted joint tight against working loads. Running down the bolt or stud, it draws the connected parts together and holds them under the forces the truck sees in daily material handling service.
Raymond builds this threaded nut into the chassis hardware of its lift trucks, where it clamps a bolted joint tight against working loads. Match the thread diameter and pitch to the bolt it threads onto, since a nut right in diameter but wrong in pitch will not run on.
| Type | Nut |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA760-054 |
| Weight (lbs) | 0.25 |
| Length (in) | 1.00 |
| Width (in) | 1.15 |
| Height (in) | 1.2 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA760-054 |
|---|---|
| Product ID | 11657 |
| Short Link | https://forkliftsetc.net/?p=11657 |
| OEM Number | RA760-054 |
| Part Number |
|---|
| 3038434 |
| 800041185 |
| BT760054 |
| HW-2026 |
| HY3038434 |
| LP1078-1023 |
| RA760-054 |
| RADS232253 |
