$439.90
Hydraulic valve for Raymond lift trucks, controlling the flow or pressure of oil in the lift or steering circuit. A worn or stuck valve causes drift, slow or weak function, or lost pressure; it is replaced or rebuilt to restore correct hydraulic control.
Inside a Raymond lift truck's hydraulic circuit, this valve controls the flow or pressure of the oil that drives the lift, lower, and tilt functions, metering where and how fast the fluid moves so the mast and forks respond to the operator's command. It is a Raymond part, replacing the original valve in its mounting position in the circuit.
A hydraulic valve fails in ways the operator feels at the controls. When it sticks, leaks internally, or drifts out of its pressure setting, a lift function starts responding slowly, will not hold a raised load, or behaves erratically, and those symptoms trace back to the valve rather than the pump or cylinders. Fitting the correct replacement restores controlled, repeatable hydraulic operation.
Match the valve to the one being replaced by its body, port arrangement, and pressure setting, since a hydraulic valve has to seal to its mounting and meter at the rating the circuit was built around.
| SKU | RA1020951-001 |
|---|---|
| Product ID | 11942 |
| Category | Hydraulics |
| Brand | Raymond |
| Weight | 0.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Valve |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1020951-001 |
|---|---|
| Product ID | 11942 |
| Short Link | https://forkliftsetc.net/?p=11942 |
| Part Number |
|---|
| RA1020951-001 |
