$2.50
Raymond cotter pin for chassis and hardware assembly on Raymond lift trucks, passing through a drilled hole and bent open to lock a castle nut or retain a clevis pin so it cannot back out under vibration. As commodity hardware it is a single-use retainer, replaced whenever the joint it secures is opened and matched against the pin being removed to confirm the size.
A Raymond cotter pin used in chassis and hardware assembly on Raymond lift trucks, carried under Raymond's own part reference. A cotter pin passes through a drilled hole and is bent open to lock a castle nut or retain a clevis pin so it cannot back out under vibration.
As commodity hardware, it is a single-use retainer replaced whenever the joint it secures is opened. Match it against the pin being removed to confirm the size before installing.
| Type | Pin, Cotter |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.15 |
| Length (in) | 1.60 |
| Width (in) | 1.00 |
| Height (in) | 0.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1023415 |
|---|---|
| Product ID | 11969 |
| Short Link | https://forkliftsetc.net/?p=11969 |
| Part Number |
|---|
| RA1023415 |
