$10.77
Crown switch lever for Crown lift trucks, the moving arm that the operator or a mechanism pushes to trip an operator switch. It takes repeated actuation and can wear, bend, or break over time, at which point the switch no longer triggers reliably. Fitting the correct Crown lever replaces the original in place and restores clean switch actuation.
An operator switch is tripped by the lever that pushes it, and this Crown switch lever is that moving arm, the member the operator or a mechanism presses to actuate the switch. It carries the daily motion of the control and sets whether the switch triggers cleanly each time.
A lever takes repeated actuation and eventually wears at its pivot, bends, or breaks, at which point the switch no longer triggers reliably or consistently. This is the Crown replacement, installing in place of the original lever on Crown lift trucks to restore clean, positive switch actuation.
Confirm the lever matches the switch and mounting it works with before fitting, since lever shape and pivot vary by switch configuration.
| SKU | CR-388 |
|---|---|
| Product ID | 11971 |
| OEM Number | CR089263 |
| Category | Electrical, Switches |
| Brand | Crown |
| Weight | 0.05 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Switch lever |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR089263 |
| Weight (lbs) | 0.05 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR-388 |
|---|---|
| Product ID | 11971 |
| Short Link | https://forkliftsetc.net/?p=11971 |
| OEM Number | CR089263 |
| Part Number |
|---|
| 800020225 |
| CR-388 |
| CR089263 |
| CR89263 |
| DWCR89263 |
| HM89263 |
| LP450-1030 |
