$2,195.00
This Raymond steer motor drives the power steering on a Raymond lift truck, turning controller commands into the motion that swings the steered wheel so the operator steers with light effort instead of muscling a mechanical linkage. It mounts into the steering drive and replaces a motor worn at the brushes, bearings, and windings, the cause of heavy, erratic, or unresponsive steering.
The steer motor drives the power steering on a Raymond lift truck, turning controller commands into the motion that swings the steered wheel so the operator steers with light effort instead of muscling a mechanical linkage. This Raymond motor mounts into the steering drive and carries the duty of constant directional changes across a shift.
A failing steer motor shows up as heavy, erratic, or unresponsive steering, or fault codes tied to the steer circuit, and electric steer motors wear at the brushes, bearings, and windings after long service. Built to the mounting and electrical interface of the original, it replaces the steer motor in the position it was cataloged for. Match the mounting and shaft to the motor being replaced, since the steering drive geometry sets whether it bolts in.
| SKU | RA1216258/450 |
|---|---|
| Product ID | 12126 |
| Category | Electric Motors, Electrical |
| Brand | Raymond |
| Weight | 22 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Motor, Steer |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 22.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1216258/450 |
|---|---|
| Product ID | 12126 |
| Short Link | https://forkliftsetc.net/?p=12126 |
| Part Number |
|---|
| RA1216258/450 |
