$6.15
A bushing sleeve lines a bore to give a shaft or pin a smooth, replaceable surface to turn or slide against, absorbing wear at the joint so the surrounding housing does not. The sleeve presses into place and becomes the sacrificial bearing surface, renewed when clearance opens up rather than reaming or replacing the part it sits in. A worn sleeve shows itself as play, rattle, or a sloppy pivot.
A bushing sleeve lines a bore to give a shaft or pin a smooth, replaceable surface to turn or slide against, absorbing wear at the joint so the surrounding housing does not. The sleeve presses into place and becomes the sacrificial bearing surface, renewed when clearance opens up rather than reaming or replacing the part it sits in.
A worn sleeve shows itself as play, rattle, or a sloppy pivot, and swapping it restores a tight fit. Match the sleeve's inner diameter, outer diameter, and length to the one being replaced, since a sleeve is defined by the shaft it carries and the bore it seats in.
| Type | Bushing Sleeve |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | BS-1641 |
|---|---|
| Product ID | 13836 |
| Short Link | https://forkliftsetc.net/?p=13836 |
| Part Number |
|---|
| BS-1641 |
| LP1431-4182 |
| RA1025349-001 |
| RA1025349/001 |
| TY00590-46256-71 |
| TY005904625671 |
