$50.57
A dipstick gives a direct read of fluid level, pulled from the reservoir or fill tube to check the oil against its full and low marks before it drops far enough to starve a pump or gearset. This one is cataloged for Raymond lift trucks, where a quick level check is part of routine service between fills.
A dipstick gives a direct read of fluid level, pulled from the reservoir or fill tube to check the oil against its full and low marks before it drops far enough to starve a pump or gearset. This one is cataloged for Raymond lift trucks, where a quick level check is part of routine service.
The stick itself is a simple gauge; it gets replaced when it is bent, the markings wear off, or the cap or seal at the top no longer closes the tube cleanly. Match the dipstick length and the cap or tube fitting to the one coming out, since the length is what places the marks at the correct level and a mismatch reads high or low.
| Type | Dipstick |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.20 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-2036 |
|---|---|
| Product ID | 13895 |
| Short Link | https://forkliftsetc.net/?p=13895 |
| Part Number |
|---|
| HW-2036 |
| LP1089-3419 |
| RA828-006-440 |
| RA828006440 |
