$14.37
This machined cover shim sets the correct clearance or alignment behind a cover on Raymond lift trucks, added or replaced in the right thickness to control the gap or preload at an assembly. Holding that spacing keeps bearings and mating parts sitting at their designed positions, and the shim is replaced when it is deformed or when clearance needs resetting during a rebuild.
Sized in a specific thickness to set the correct clearance or alignment behind a cover on Raymond lift trucks, this shim is the thin machined spacer that controls the gap or preload at an assembly. Adding or replacing it in the right thickness positions bearings and mating parts where they were designed to sit.
A shim is replaced when it is deformed or when clearance needs resetting during a rebuild, since a bent or wrong-thickness shim throws off the preload it was there to hold. Match its thickness to the shim coming off, or to the clearance the assembly calls for, since thickness is the entire function of the part.
| Type | Cover shim |
|---|---|
| Equipment | Raymond |
| Manufacturer Part Number | RA828-005-209-007 |
| Weight (lbs) | 0.30 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-1384 |
|---|---|
| Product ID | 13909 |
| Short Link | https://forkliftsetc.net/?p=13909 |
| OEM Number | RA828-005-209-007 |
| Part Number |
|---|
| CTNA017553 |
| ET22954 |
| HW-1384 |
| LP790-2908 |
| MBNA017553 |
| RA828-005-209-007 |
| RA828-005-209/007 |
| RA828-006-867-007 |
| RA828-006-867/007 |
| RA828005209007 |
| SY78553 |
| UKNA017553 |
