$16.30
Crown's roller shaft, part number CR128802-003, is built for Crown lift trucks, serving as the pin a roller rides on inside the mast or carriage assembly. Replacing a worn shaft restores a tight, accurate fit for the roller it supports and reduces play in the roller assembly during normal operation.
Serving as the pin a mast or carriage roller rides on, this Crown roller shaft is built for Crown lift trucks, where it holds the roller in position and lets it turn against the mast rail under the load passing through the carriage. The shaft carries the radial load of the roller and takes the wear of that roller turning on it thousands of times a shift, so over time its bearing surface wears and play develops in the roller assembly.
That play shows up as a loose or rattling roller, uneven roller contact against the rail, and rougher carriage travel. Replacing the shaft restores a tight, accurate fit for the roller it supports and returns the roller to true contact with the mast rail, which protects both the roller and the rail from accelerated wear.
Match the shaft diameter and length to the one being removed, since roller shafts of similar size differ by the roller bore they carry and the mounting they seat in.
| Type | Roller shaft |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR128802-003 |
| Weight (lbs) | 0.60 |
| Length (in) | 6.00 |
| Width (in) | 6.00 |
| Height (in) | 0.7 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR128802-003 |
|---|---|
| Product ID | 13938 |
| Short Link | https://forkliftsetc.net/?p=13938 |
| OEM Number | CR128802-003 |
| Part Number |
|---|
| CR128802-003 |
| CR128802-3 |
| SY99-01180 |
| TSA-CR128802-003 |
| TSA-CR128802-3 |
| TSA-SY99-01180 |
