$14.55
The tie rod end connects the steering linkage to the steering knuckle and transmits steering input to the wheel through a pivoting ball joint that allows steering and suspension movement, and this is the left-hand unit made by Toyota. It replaces a worn end where play has developed in the steering, felt as looseness at the wheel; left and right ends thread opposite so the hand is not interchangeable.
The tie rod end connects the steering linkage to the steering knuckle and transmits steering input to the wheel through a pivoting ball joint that allows for steering and suspension movement, and this is the left-hand unit made by Toyota. The ball joint wears with use until play develops in the steering, felt as looseness or imprecision at the wheel, the wear signal that calls for replacement before the joint fails.
Left and right hand ends thread opposite so the linkage can be adjusted for toe, so the hand of the part is not interchangeable. This left-hand end threads onto its side of the tie rod and pins to the knuckle. Match the thread and taper to the original, and confirm you are replacing the left-hand end, since the two sides are cut opposite.
| Type | LH Tie Rod End |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | TA86-501-98 |
|---|---|
| Product ID | 14017 |
| Short Link | https://forkliftsetc.net/?p=14017 |
| Part Number |
|---|
| TA86-501-98 |
