$1.20
A nut threads onto a bolt or stud to clamp a joint together and hold it under load. This Crown nut is a chassis hardware fastener for Crown lift trucks, securing a bolted connection against the vibration and load cycling of forklift service. It serves as a direct replacement for the fastener the original Crown assembly called for at that hardware point.
A nut threads onto a bolt or stud and is torqued down to create the clamp load that holds a joint together, resisting the vibration that would otherwise back it off. This Crown nut serves a chassis hardware position on Crown lift trucks, measuring about 1.3 by 0.5 inches across its body.
Because a nut has to match the fastener it runs on, match the thread size and pitch to the nut being replaced, since a nut wrong in pitch will cross-thread or fail to seat on the original bolt.
| Type | Nut |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR060059-003 |
| Weight (lbs) | 0.01 |
| Length (in) | 1.30 |
| Width (in) | 0.25 |
| Height (in) | 0.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR60059-003 |
|---|---|
| Product ID | 14020 |
| Short Link | https://forkliftsetc.net/?p=14020 |
| OEM Number | CR060059-003 |
| Part Number |
|---|
| 800008042 |
| 800018505 |
| AU725.08000.30 |
| CR060059-003 |
| CR060059-3 |
| CR60059-003 |
| CR60059-3 |
| LI9210826110 |
| TSA-800008042 |
| TSA-800018505 |
| TSA-AU725.08000.30 |
| TSA-CR060059-003 |
| TSA-CR060059-3 |
| TSA-CR60059-003 |
| TSA-CR60059-3 |
| TSA-LI9210826110 |
