$22.00
Seating inside a bore to carry a shaft or pin on a controlled bearing surface, this Raymond bearing sleeve takes the wear that would otherwise cut into the housing casting itself. Replacing the sleeve restores the original fit and clearance, clearing the play, noise, or misalignment that a worn inside diameter produces in the joint it supports.
Raymond catalogs this bearing sleeve as a chassis component, a machined cylindrical liner that seats inside a bore to carry a shaft or pin on a controlled bearing surface. A sleeve of this kind takes the wear that would otherwise cut into the housing itself, so replacing the sleeve restores the original fit and clearance instead of forcing a repair to the surrounding casting.
Sleeves wear on the inside diameter as the shaft turns or pivots against them, and a worn sleeve shows up as play, noise, or misalignment in the joint it supports. Because bore and shaft dimensions govern the fit, measure the inside diameter against the shaft it rides on and the outside diameter against the housing it presses into before installing, since a sleeve is only correct when both surfaces match. This is a Raymond replacement part for the chassis assembly it was originally fitted to.
| Type | Bearing Sleeve |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA780-330-002 |
|---|---|
| Product ID | 14086 |
| Short Link | https://forkliftsetc.net/?p=14086 |
| Part Number |
|---|
| 800135600 |
| BR-1676 |
| BT780-330-002 |
| CTNA015099 |
| LP1431-4152 |
| MBNA015099 |
| RA780-330-002 |
| RA780-330-2 |
| RA780-330/002 |
| TY00590-05370-71 |
| TY005900537071 |
| UKNA015099 |
