$19.56
Taking the load and the wear at a pivot or slide, this Raymond bushing is the sacrificial sleeve that spares the shaft and housing it sits between. It replaces one that has worn oversize, where a joint develops the play, noise, or slop that throws off alignment. Bushings like it run at mast pivots, linkages, and steer components across a lift truck.
A bushing is the sacrificial bearing surface at a pivot or slide, a sleeve that carries the load and takes the wear so the shaft and housing it sits between do not. This Raymond bushing replaces one that has worn oversize, the point where a joint develops play, noise, or slop that throws off alignment and accelerates wear on the parts around it.
Bushings run at mast pivots, linkages, steer components, and other loaded joints on a lift truck, and swapping a worn one restores the tight fit the joint was built with. Match the inside diameter, outside diameter, and length to the bushing coming off, since a bushing has to press into its bore and fit its shaft to carry load correctly.
| Type | Bushing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA460-488 |
|---|---|
| Product ID | 14142 |
| Short Link | https://forkliftsetc.net/?p=14142 |
| Part Number |
|---|
| 005917216681 |
| 220029846 |
| 3137846 |
| 800063352 |
| CT1055606 |
| CTNA013752 |
| HY3137846 |
| MB1055606 |
| MBNA013752 |
| RA460-487 |
| RA460-488 |
| SY40069 |
| SY99-01305 |
| TY00591-72166-81 |
| UKNA013752 |
| YT220029846 |
