$1,978.80
On a reach truck, this Raymond reach cylinder is the hydraulic actuator that extends and retracts the pantograph or reach carriage, pushing the forks out over the load and drawing them back in. It converts hydraulic pressure into the controlled linear travel that places a load into a rack and retrieves it. Worn seals drop holding force, and replacing it restores full, controlled reach travel.
On a reach truck, the reach cylinder is the hydraulic actuator that extends and retracts the pantograph or reach carriage, pushing the forks out over the load and drawing them back in, and this is a Raymond cylinder built for that function. It converts hydraulic pressure into the controlled linear travel that places a load into a rack and retrieves it, one of the defining motions a reach truck performs every cycle.
Reach cylinders work through a constant extend-and-retract duty, and their seals are the wear point: a rod seal that weeps under pressure or a scored bore drops the holding force and slows or weakens the reach stroke. Replacing the cylinder restores full, controlled reach travel and clean pressure holding. As a Raymond part, its stroke length, port sizes, and mounting match the reach mechanism it was cataloged for.
| SKU | RA1150998 |
|---|---|
| Product ID | 14264 |
| Category | Hydraulics |
| Brand | Raymond |
| Weight | 14 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Reach Cylinder |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1150998 |
|---|---|
| Product ID | 14264 |
| Short Link | https://forkliftsetc.net/?p=14264 |
| Part Number |
|---|
| RA1150998 |
