$5.59
Torsion spring for Crown lift trucks that stores energy through twist rather than compression, building resistance as it winds under load and releasing that force to return a component to position. It gives the assembly consistent rotational return action, and a replacement restores the intended return pressure and reliable movement after the original weakens through repeated angular load.
Wound to store energy through twist rather than compression, this torsion spring delivers rotational return force in the Crown lift truck assembly it was cataloged for. As the spring winds under load it builds resistance, then releases that stored force to drive a component back to its rest position, giving the mechanism consistent return action every cycle.
Torsion springs carry repeated angular load, and that duty gradually relaxes the coil so it no longer produces its rated return pressure. A spring that has weakened lets the component it drives return slowly or fall short of its seated position, the usual reason for the swap. A fresh spring restores the intended return force and the reliable movement the assembly depends on.
Because a torsion spring is defined by its leg geometry and wind direction as much as its coil, match the free length, wire diameter, leg configuration, and direction of wind to the spring being replaced, since a spring that loads in the wrong direction or seats on the wrong leg will not drive the component correctly.
| Type | Torsion Spring |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.05 |
| Length (in) | 1.25 |
| Width (in) | 2.25 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR131105 |
|---|---|
| Product ID | 14272 |
| Short Link | https://forkliftsetc.net/?p=14272 |
| Part Number |
|---|
| CR131105 |
