$5.78
Fitted over a shaft or into a bore, this Raymond sleeve provides a replaceable wear surface, spacer, or protective liner in the assembly it belongs to. Because the sleeve wears in place of the more expensive part it protects, replacing it renews the fit without touching the shaft or housing.
A sleeve fits over a shaft or into a bore to give an assembly a replaceable wear surface, a spacer, or a protective liner, and this Raymond part does that job where a rotating or sliding component would otherwise ride directly against a shaft or housing. Because the sleeve is designed to take the wear in place of the more expensive part it protects, swapping it renews the running fit without touching the shaft, gear, or housing around it.
Sleeves wear on the face that carries the load, developing scoring, ovality, or a polished groove where the mating part rides. Once that clearance opens up, the assembly loses its intended fit and starts to knock or spin, so replacing the sleeve returns the joint to its original tolerance.
Match the inside and outside diameters to the components it seats between, since a sleeve too loose will spin in its bore and one too tight will not seat fully.
| Type | Sleeve |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1043118 |
|---|---|
| Product ID | 14330 |
| Short Link | https://forkliftsetc.net/?p=14330 |
| Part Number |
|---|
| RA1043118 |
