$26.70
Holding a sensor at the fixed position it needs to read accurately, this Raymond sensor bracket mounts the sensor to the machine and sets its alignment to the target it monitors. If the bracket is bent or the wrong one, the sensor reads from the wrong position and the function it feeds behaves erratically.
Holding a sensor at the exact position it needs to read from, this Raymond sensor bracket mounts the sensor to the machine and fixes its alignment to the target it monitors. A sensor reports accurately only when it sits at the correct gap and angle to what it is sensing, and the bracket is what establishes and maintains that geometry.
Because the bracket sets the sensor's position, a bent bracket or the wrong one shifts the sensor off its target, and the function that relies on the reading then behaves erratically or drops out. Keeping the bracket true matters to the sensor's accuracy as much as the sensor itself does.
Match the bracket to the sensor and the mounting location it was made for, so the sensor sits at the designed gap and angle to its target rather than reading from an offset position.
| SKU | RA1023540 |
|---|---|
| Product ID | 14363 |
| Category | Electrical, Sensors |
| Brand | Raymond |
| Weight | 0.1 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Sensor Bracket |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1023540 |
|---|---|
| Product ID | 14363 |
| Short Link | https://forkliftsetc.net/?p=14363 |
| Part Number |
|---|
| RA1023540 |
