$157.50
Cut for the left-hand position, this Raymond link is a rigid connecting member that ties two points in a linkage and transfers motion or load between them as the mechanism moves. Left and right links are handed mirror images that are not interchangeable, so the left link seats only where the linkage geometry calls for it.
Cut for the left-hand position, this Raymond link is a rigid connecting member that ties two points in a linkage and transfers motion or load between them as the mechanism moves. Left and right links are handed, mirror images that are not interchangeable, so the left link seats only where the linkage geometry calls for it.
A link that is bent, elongated at its pivot holes, or worn at the connection introduces slop that throws off the timing or alignment of everything downstream in the linkage. This Raymond replacement returns the correct length and pivot spacing to the assembly. Confirm the pivot hole spacing and diameter against the link being replaced, since those set how the link indexes into the linkage.
| Type | Link, Left |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA313188-002 |
|---|---|
| Product ID | 14382 |
| Short Link | https://forkliftsetc.net/?p=14382 |
| Part Number |
|---|
| BT313188-002 |
| PM313188-002 |
| RA313188-002 |
| SY99-03683 |
