$39.01
Serving as a renewable bearing surface, this bushing is a plain sleeve that supports a shaft or pin turning inside a bore, taking the wear that would otherwise fall on the more expensive components around it. It is meant to be sacrificial, wearing in place of the shaft and housing and pressed out and replaced when the running fit goes loose.
Serving as a renewable bearing surface, this bushing is a plain sleeve that supports a shaft or pin turning inside a bore, taking the wear that would otherwise fall on the more expensive components around it. A bushing is meant to be sacrificial: it wears in place of the shaft and housing and is pressed out and replaced when the running fit goes loose.
Once worn, it lets the shaft or pin develop play, which shows up as knock, slop, or misalignment. Match the inside diameter, outside diameter, and length to the bushing being replaced, since a press-fit bushing has to seat fully in its bore and hold the intended clearance on the shaft.
| Type | Bushing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | BS-1333 |
|---|---|
| Product ID | 14398 |
| Short Link | https://forkliftsetc.net/?p=14398 |
| Part Number |
|---|
| 005912728481 |
| 005914406581 |
| 800076048 |
| BS-1333 |
| BS-1477 |
| CR065117-008 |
| CR065117-8 |
| CR65117-008 |
| CR65117-8 |
| CR651178 |
| ET38306 |
| LP1430-9412 |
| LP1431-4005 |
| TY00591-27284-81 |
| TY00591-44065-81 |
