$38.85
Crown uses this thrust washer in their equipment to carry axial load on a shaft. Standing between a rotating part and a fixed face, it cuts friction where the two meet and controls end play, keeping the shaft from wandering back and forth under the loads of daily service.
A thrust washer carries axial load on a shaft, standing between a rotating part and a fixed face to cut friction and control end play. Crown uses this one in their equipment. Match the inner diameter, outer diameter, and thickness to the thrust washer being replaced.
| Type | Thrust washer |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR082381 |
| Weight (lbs) | 0.60 |
| Length (in) | 1.00 |
| Width (in) | 1.00 |
| Height (in) | 0.2 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-2405 |
|---|---|
| Product ID | 14418 |
| Short Link | https://forkliftsetc.net/?p=14418 |
| OEM Number | CR082381 |
| Part Number |
|---|
| 220018103 |
| 3017921 |
| 800019708 |
| CR-082381 |
| CR0.082381 |
| CR082381 |
| CR82381 |
| HW-2405 |
| HY3017921 |
| LP1069-1213 |
| SY99-00796 |
| SYCR82381 |
| YT220018103 |
