$1,141.73
Under oil pressure this Raymond tilt cylinder pitches a forklift mast forward and back, extending and retracting to angle the forks for picking up and stabilizing a load. Built for the tilt function on Raymond lift trucks, it typically works as one of a pair controlling mast angle through the full range of travel, its piston, rod, and seals doing the work.
Under oil pressure a tilt cylinder pitches a forklift mast forward and back, extending and retracting to angle the forks for picking up and stabilizing a load. Raymond built this cylinder for the tilt function on its lift trucks, where a pair of cylinders typically works together to control mast angle through the full range of travel.
The piston, rod, and seals inside are what do the work and what eventually wear: as the seals age, the cylinder can leak, drift, or lose the ability to hold the mast at a set angle under load. A cylinder that no longer holds position or weeps oil is the signal for replacement.
This installs in place of the original Raymond tilt cylinder. Match the bore, stroke, and mounting arrangement of the cylinder coming off, since those determine both the tilt range and how the cylinder pins into the mast and frame.
| SKU | RA1152888 |
|---|---|
| Product ID | 14441 |
| Category | Hydraulics, Tilt Cylinders |
| Brand | Raymond |
| Weight | 16.3 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Tilt Cylinder |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1152888 |
|---|---|
| Product ID | 14441 |
| Short Link | https://forkliftsetc.net/?p=14441 |
| Part Number |
|---|
| RA1152888 |
