$875.00
Raymond's lift pump generates the hydraulic pressure that raises the forks and load, drawing oil from the reservoir and delivering it to the lift cylinder under working pressure. A worn or failing pump shows up as slow lifting, weak capacity, or a load that will not hold, and a replacement restores lift speed and lifting force in the hydraulic circuit it serves.
Building the hydraulic pressure that raises the forks and load, this Raymond lift pump draws oil from the reservoir and delivers it to the lift cylinder under working pressure on the truck it was cataloged for.
A lift pump that is worn or failing cannot build full pressure, and that shows up at the forks as slow lifting, reduced capacity, or a load that drifts down instead of holding. Internal wear, scored surfaces, and leakage past worn clearances all cut the pressure the pump can generate.
Installed as a replacement for the original, it restores lift speed and lifting force to the hydraulic circuit it serves. Match the pump's displacement, its port sizes, and its mounting and shaft arrangement to the unit being replaced so it delivers the right flow and bolts into the same drive.
| SKU | RA1030633-100 |
|---|---|
| Product ID | 14473 |
| Category | Hydraulic Pumps, Hydraulics |
| Brand | Raymond |
| Weight | 9.5 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Lift Pump |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1030633-100 |
|---|---|
| Product ID | 14473 |
| Short Link | https://forkliftsetc.net/?p=14473 |
| Part Number |
|---|
| RA1030633-100 |
