$55.58
This machined steel skid bar bolts to the base frame on Crown WP 3000 series walkie pallet trucks, absorbing the ground contact and abrasion that would otherwise wear the truck body. It rides low on the chassis and takes the scuffing that occurs during travel and load handling, protecting the structural frame underneath. As a sacrificial wear component, a fresh bar restores the original standoff and protection.
Machined steel skid bars take the ground contact and abrasion that would otherwise grind into the truck body, bolting to the base frame on Crown WP 3000 series walkie pallet trucks as a sacrificial wear surface. As the truck noses into dock plates, ramp edges, and debris, the skid absorbs the scraping so the frame underneath stays intact.
Steel construction lets the bar wear down gradually rather than gouging or cracking, and because it is bolted rather than welded, a worn skid comes off and a fresh one goes on without cutting or grinding the frame. A skid that has thinned, curled, or torn loose no longer protects the base and should be replaced before the wear reaches the frame itself. Match the bolt-hole pattern and bar length to the frame position being serviced.
| Type | Skids |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 5.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR147561 |
|---|---|
| Product ID | 14548 |
| Short Link | https://forkliftsetc.net/?p=14548 |
| Part Number |
|---|
| CR147561 |
| HM147561 |
| TSA-CR147561 |
| TSA-HM147561 |
