$2.39
A Crown dowel pin aligns two parts to each other, seating in matching bores to hold them in precise position on Crown equipment. It sets location rather than clamping, keeping mating components from shifting as it holds their alignment through the bores it seats in under load.
A Crown dowel pin aligns two parts to each other, seating in matching bores to hold them in precise position on Crown equipment. It sets location rather than clamping, keeping mating components from shifting. Match the pin diameter and length to the one coming out of the bore before pressing in the replacement.
| Type | Dowel pin |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR061011-003 |
| Weight (lbs) | 0.10 |
| Length (in) | 1.00 |
| Width (in) | 0.45 |
| Height (in) | 1.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HW-1198 |
|---|---|
| Product ID | 14722 |
| Short Link | https://forkliftsetc.net/?p=14722 |
| OEM Number | CR061011-003 |
| Part Number |
|---|
| 005917396881 |
| 220015070 |
| 3055581 |
| 800075881 |
| AX1846Z312 |
| CR-061011-003 |
| CR061011-003 |
| CR061011-3 |
| CR61011-003 |
| CR61011-3 |
| CR610113 |
| ET22858 |
| HW-1198 |
| HY1151722 |
| HY3055581 |
| LP1218-1294 |
| RA812-407 |
| RADS232495 |
| RO1846Z312 |
| SY43305 |
| TY00591-73968-81 |
| YT1151722 |
| YT220015070 |
| YT580003129 |
