$31.04
A bushing gives a pivot or shaft a replaceable bearing surface, taking the friction and wear of rotating or sliding motion so the costlier part it rides in does not have to. Pressed into its bore, this Raymond bushing carries side load and holds the shaft in alignment while letting it turn or slide freely. Designed to wear first, it is replaced when play or an oval bore appears.
A bushing gives a pivot or shaft a replaceable bearing surface, taking the friction and wear of rotating or sliding motion so the more expensive part it rides in does not have to. Pressed into its bore, this Raymond bushing carries side load and holds the shaft in alignment while letting it turn or slide freely.
Bushings are designed to wear before the components around them, so play, an oval bore, or a shaft that no longer runs true is the signal to replace the bushing and restore the original clearance. Match the bushing to the bore it presses into and the shaft it carries, since a bushing seats by its outside diameter and sets running clearance by its inside diameter.
| Type | Bushing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1050089-001 |
|---|---|
| Product ID | 14816 |
| Short Link | https://forkliftsetc.net/?p=14816 |
| Part Number |
|---|
| 800140755 |
| RA1050089-001 |
| RA1050089/001 |
