$1.59
Passing through a drilled hole and bending its legs back, this Crown cotter pin locks a castellated nut or clevis so it cannot back off under vibration. It is common retention hardware on Crown lift trucks, holding a fastener in place once its legs are spread so the joint stays secure through service and load.
Passing through a drilled hole and bending its legs back, this Crown cotter pin locks a castellated nut or clevis so it cannot back off under vibration. It is common retention hardware on Crown lift trucks. Match the pin diameter and leg length to the hole it passes through.
| Type | Cotter pin |
|---|---|
| Equipment | Crown |
| Manufacturer Part Number | CR050026-002 |
| Weight (lbs) | 3.32 |
| Length (in) | 1.35 |
| Width (in) | 1.36 |
| Height (in) | 0.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR50026-002 |
|---|---|
| Product ID | 14922 |
| Short Link | https://forkliftsetc.net/?p=14922 |
| OEM Number | CR050026-002 |
| Part Number |
|---|
| 800138854 |
| CR-050026-002 |
| CR050026-002 |
| CR050026-2 |
| CR050026002 |
| CR50026-002 |
| CR50026-2 |
| DWCA50026-002 |
| DWCA50026002 |
| GNC61300502 |
| GNC61300502GT |
| HM50026002 |
| NI50026-002H |
| TX61300502 |
| TXC61300502 |
| UK50026-002H |
| TSA-800138854 |
| TSA-CR-050026-002 |
| TSA-CR050026-002 |
| TSA-CR050026-2 |
| TSA-CR050026002 |
| TSA-CR50026-002 |
| TSA-CR50026-2 |
| TSA-DWCA50026-002 |
| TSA-DWCA50026002 |
| TSA-GNC61300502 |
| TSA-GNC61300502GT |
| TSA-HM50026002 |
| TSA-NI50026-002H |
| TSA-TX61300502 |
| TSA-TXC61300502 |
| TSA-UK50026-002H |
