$764.50
This Raymond load backrest bolts to the carriage above the forks and keeps stacked or tall loads from tipping back toward the mast and operator during lift and travel. It is manufactured by Raymond for its electric lift trucks and belongs to the carriage component group that carries rollers, brackets, and related hardware.
A load backrest bolts to the carriage above the forks and stops stacked or tall loads from tipping back toward the mast and operator as the truck lifts and travels. Raymond builds this one for its electric lift trucks, sizing it to the carriage it mounts on so the guard sits square behind the load.
The backrest is a welded steel structure that takes the push of a load leaning against it, and it is replaced when it is bent, cracked, or the mounting has been damaged in service. It belongs to Raymond's carriage component group, the same base assembly that carries the rollers, brackets, and related hardware riding on the carriage.
Match the replacement to the original by its overall width and height and by the carriage mounting pattern, since a backrest is cut to a specific load size and has to bolt to the existing holes on the carriage.
| Type | Backrest |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 110.00 |
| Length (in) | 23.00 |
| Width (in) | 38.00 |
| Height (in) | 48.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA223-001-569/C08 |
|---|---|
| Product ID | 14927 |
| Short Link | https://forkliftsetc.net/?p=14927 |
| Part Number |
|---|
| RA223-001-569/C08 |
