$349.00
A traction encoder reports the speed and direction of the traction motor back to the truck's controller, the feedback the drive system relies on to regulate acceleration, hold speed, and blend in regenerative braking. Supplied as a kit with its mounting and connection pieces, this assembly replaces an encoder whose drift or failure shows up as erratic speed, hesitation, or stored feedback fault codes.
A traction encoder reports the speed and direction of the traction motor back to the truck's controller, the feedback the drive system relies on to regulate acceleration, hold speed, and blend in regenerative braking smoothly. When an encoder drifts or fails, the symptoms are drivability faults: erratic speed, hesitation, or stored controller error codes tied to motor feedback.
Supplied as a kit, this assembly arrives with the encoder and its mounting and connection pieces together, so the failed unit comes off and the new one goes on as a set rather than sourced part by part. Match the encoder to the traction motor and controller it feeds, since encoders differ in pulse count and connector, and both have to agree with the drive system for the feedback to read correctly.
| SKU | SCR-2757 |
|---|---|
| Product ID | 15062 |
| Category | Electrical, Sensors |
| Brand | Crown |
| Weight | 0.65 lbs |
| Dimensions | 0.35" L × 0.4" W × 20.5" H |
| Type | Kit Asm Traction Encoder |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | SCR-2757 |
|---|---|
| Product ID | 15062 |
| Short Link | https://forkliftsetc.net/?p=15062 |
| Part Number |
|---|
| CR062207-005 |
| CR062207-5 |
| CR62207-005 |
| CR62207-5 |
| CR622075 |
| LP439-1218 |
| SCR-2757 |
