$43.53
A clamp nut threads down to draw a component tight and lock it in place, holding position against the vibration and load that would back an ordinary nut loose. Raymond specifies this nut where a part has to stay clamped through continuous service. This replacement restores secure, vibration-resistant clamping to the joint it locks down.
A clamp nut threads down to draw a component tight and lock it in place, holding position against the vibration and load that would back an ordinary nut loose. Raymond specifies this nut where a part has to stay clamped through continuous service.
Match the thread size and pitch to the nut being replaced, since a clamp nut right in diameter but wrong in pitch will not thread onto the shaft.
| Type | Nut, Clamp |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1020548-004 |
|---|---|
| Product ID | 15067 |
| Short Link | https://forkliftsetc.net/?p=15067 |
| Part Number |
|---|
| 800041198 |
| BRPM312180-000 |
| BT312180-000 |
| CTNA012190 |
| CTNA12190 |
| MBNA012190 |
| PM312180-000 |
| RA1020548-004 |
| RA1020548/004 |
| RA312180-000 |
| RA761-870-07 |
| RA761-870/07 |
