$17.40
Keeping fluid on one side of a moving joint and contaminants on the other, this seal cup rides against a shaft or bore to hold pressure and prevent leakage. Common in hydraulic and pneumatic cylinders, its flexible lip is energized by system pressure to maintain a tight seal as the piston strokes, replacing a hardened or torn original that lets a cylinder drift or lose holding force.
A seal cup keeps fluid on one side of a moving joint and contaminants on the other, riding against a shaft or bore to hold pressure and prevent leakage. Cup seals are common in hydraulic and pneumatic cylinders, where the flexible lip is energized by system pressure to maintain a tight seal as the piston strokes. A hardened, torn, or worn seal cup lets fluid bypass, which shows up as a cylinder that drifts, leaks, or loses holding force. Match the cup's inside and outside diameter and its cross-section to the seal being replaced, since a seal of the wrong size will not fit the groove or seal the bore.
| Type | Seal Cup |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | SE-765 |
|---|---|
| Product ID | 15091 |
| Short Link | https://forkliftsetc.net/?p=15091 |
| Part Number |
|---|
| BT313665-965 |
| ET331248 |
| LP893-1033 |
| PM313665-965 |
| RA313665-965 |
| RA530-757 |
| RADS233042 |
| SE-765 |
