$4.67
Lining a pivot or mounting bore, this bushing takes the friction so a pin or shaft rides against the replaceable sleeve rather than wearing the housing directly. It runs as a plain bearing surface at a linkage or mount and is meant to be renewed as it wears, protecting the more expensive part it sits inside.
A replaceable wear sleeve for a pivot or mounting point, this bushing lines a bore so a pin or shaft rides against the bushing rather than wearing the housing directly. It carries the friction at a linkage or mount and is meant to be renewed as it wears, protecting the more expensive part it sits inside.
Play, knock, or a sloppy joint is the signal that a bushing has worn past its service size. Match the bore and shaft diameters and the length to the bushing being replaced so the new one seats and holds true.
| Type | Bushing |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA462-010 |
|---|---|
| Product ID | 15112 |
| Short Link | https://forkliftsetc.net/?p=15112 |
| Part Number |
|---|
| 220008958 |
| 3014910 |
| 800040127 |
| CTNA014700 |
| HY3014910 |
| MBNA014700 |
| RA462-010 |
| SY51303 |
| UKNA014700 |
| YT220008958 |
