$30.93
Built true in flat steel, this Raymond steering plate serves as the mounting and pivot surface for the hardware that carries steering motion, holding the steering geometry firm under repeated loading. It renews a plate worn at the pivot points, with elongated mounting holes, or damaged in a way that lets play into the steering.
Machined flat and true, this Raymond steering plate is the mounting and pivot surface that the hardware carrying steering motion bolts and turns against on the lift truck. It holds the steering geometry in its correct relationship under the repeated loading that steering a loaded truck puts through the linkage.
Wear at the pivot points, elongation of the mounting holes, or impact damage introduces play into the steering, and once the plate no longer locates its hardware precisely the truck develops slop and wanders off the operator's input. Renewing the plate takes that lost motion back out of the system.
Match the bolt pattern and pivot locations to the plate being replaced, since those interfaces determine whether the linkage lines up and the steering tracks without slop.
| Type | Steering Plate |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1079025 |
|---|---|
| Product ID | 15136 |
| Short Link | https://forkliftsetc.net/?p=15136 |
| Part Number |
|---|
| RA1079025 |
